18luck新利appios-IOS/Android通用版/手机APP下载

Hotline: +86-0769-83660708

Website

about us

case

news

contact us

Contact Us

Main product

Micro Cooling Fan Forced Convection

"Micro Cooling Fan" main role is the heat, and the heat sink is required by forced convection fan to speed up heat dissipation, so a fan of good or bad, on the whole cool...

2015-3-14
Waterproof Cooling Fan design

In general, to design "Waterproof Cooling Fan" air volume, it is necessary to sacrifice some pressure. If the fan can bring a lot of air flow, but the pressure is small, ...

2015-3-12
Small Cooling Fan structure

The stator is fixed to the "Small Cooling Fan" stent, is a non-rotating part of the motor. There are more than two rotor coil winding made from enameled wire, called wind...

2015-3-12
Cooling Fan Manufacturer accelerate heat loss

Radiators are required by "Cooling Fan Manufacturer" forced convection heat loss to accelerate, so a fan of good or bad, on the whole cooling effect plays a decisive role...

2015-3-12
Inflatable Air Blower noise level

When measuring "Inflatable Air Blower" noise requires less than 17dB noise silencer chamber conducted, one meter away from the fan, and the fan shaft is aligned alo...

2015-3-12
Mini Air Cooling Fan how maintenance?

1, "Mini Air Cooling Fan" in the use of the environment should be kept clean, fan surface remains clean, the outlet should not have debris regularly to remove dust and ot...

2015-3-12
Waterproof Cooling Fan speed

"Waterproof Cooling Fan" speed is the number of revolutions per minute of the fan blades, the unit is rpm. Fan speed is determined by the motor inside the coil turns, vol...

2015-3-12
Small Cooling Fan Which Installation

Fans check again before installation of the parts are in good condition, otherwise it should be repaired; a, read "Small Cooling Fan" manual and product samples, knowledg...

2015-3-12
Cooling Fan Manufacturer Installation Process

1, "Cooling Fan Manufacturer" After installing the fan, hand or lever toggle wheel, check whether there is too tight or collision phenomena, whether or interf...

2015-3-12
Inflatable Air Blower cleaning method

1, we first have to clean "Inflatable Air Blower" heat sink and fan apart, remove most of the dust brush fan and heat sink (heat sink can be rinsed with water directly). ...

2015-3-12

First Previous 207 208 209 210 211 212 213 Next Last to

+86-0769-83660708

Home Product News Contact