Contact Us

24V DC Cooling Fan radiating plate works

Date: 2014-12-15   Click: 1373 Times

1) If the requirements of "24V DC Cooling Fan" metal shell heat insulating plate and holding device, for an added layer of mica in between the liner, and between the fixing screws and the metal surface coupled with the device and the insulating sleeve insulating gasket tube. After the addition was 0.05mm thick mica pad, Ros about 1.8 ℃ = / W. In addition, the optional polyester film, boron nitride, tiles and other insulating spacer.
2) "24V DC Cooling Fan" plate should be kept away from heat power transformers, high-power transistors and other heat sources. To improve cooling efficiency, cooling plate surface treatment usually black.
3) These are "24V DC Cooling Fan" from the perspective of thermal conductivity of the heat radiating plate design, in view of the integrated power supply when the case temperature is below 100 ℃, it is not necessary to consider the heat radiation problem.

Back to: Industry news

+86-0769-83660708

Home Product News Contact

Baidu
map